Beijing Jia hua zhong xin Technology Co., Ltd

Products > Gas detector > Fixed gas detector > GTD-2000Tx Oxygen and Toxic Gas Detector
Product name : GTD-2000Tx Oxygen and Toxic Gas Detector
Item : 美国英思科ISC
 Enlarge Image                   Back
←[Previous Product]              [Next Product]→


Details:
 GTD-2000Tx Oxygen and Toxic Gas Detector
■ Optional remote sampling
■ Non-open-top operation
■ HART communication protocol
■ OLED display technology
■ can measure oxygen and more than 100 kinds of toxic gases
■ SIL2 certification
 
 
 
Overview
 
◤ use flame retardant structure, the explosion hazard zone of toxic gases and oxygen for continuous testing
 Built-in microprocessor to achieve self-diagnostic function
◤ use of toxic gases and oxygen for the detection principle, to create excellent selectivity
¢ long-term stability of the quality and proven test principle
◤ Built-in backlit LCD or OLED display
↑ Use the magnet bar for automatic calibration and program setting
◤ 4-20mA DC output signal
¢ using HART communication protocol, easy to maintain and build the system
◤ equipped with alarm device
- Normal: Green LED
- Alarm: red LED, beep (95 dB)
- Fault: yellow LED
 Single calibration and maintenance
Technical Parameters
 
Model GTD-2000Tx
Measurement of gas Oxygen / toxic gases (carbon monoxide, chlorine, ammonia, etc.)
Measurement method Diffusion type
Measurement methods Electrochemistry, semiconductors
Response time T90 <45 seconds
Accuracy ± 3% / full scale
Mode of operation
Operation mode display 1-LED (power supply)
Display the LCD display (built-in backlight two-wire, 8-bit) / OLED type (optional)
Alarm signal output Analog: Measuring signal: 4-20mA DC
Maintenance signal: 3mA DC
Calibration signal: 3mA DC
Fault signal: 0mA DC
Number: 2mA (HART 7, HART device description language available, optional)
Cable / Distance Power Cable + Signal Cable: 3-Wire> 1.5 Square (AWG16) / Max: 2500m
Material Housing: Aluminum die castings, 316 stainless steel (optional) / Sensors: 316 stainless steel
Conduit connection G. Rc. NPT 1/2 inch, 3/4 in, M20 (G 3/4 inch: standard)
Installation type 2-inch bar-mounted, wall-mounted, tube-mounted
Operating temperature -20 ℃ ~ +60 ℃ / -40 ℃ ~ +80 ℃ (optional)
Operating humidity 5 to 99% .RH (non-condensing)
Operating power 18 ~ 31V DC (conventional: 24V DC) / maximum: 200mA
Size 136 x 176 x 110 (W x H x D) mm
Weight 1.7kg
Certified Explosion Proof (Ex d IIC T6) KCs / IP66 / 67
Explosion-proof type (Ex d IIC Gb T4 ~ T6) ATEX, IECEx
Explosion proof type (Ex d IIC T6 Gb) NEPSI
Class standard: KR, MED, ABS, BV, DNV
HART, SIL 2, UL, KC, CE

Related Products :
RAEGuards IR infrared combustible gas detector [FGM-1200S]
20131129202350
RAEGuards IR infrared combustible gas detector [FGM-1200S]
SP-1204A carbon monoxide gas detection alarm
美国华瑞(RAE)
SP-1204A carbon monoxide gas detection alarm
MSA GasGard XL wall-mounted multi-channel controller
美国梅思安(MSA)
MSA GasGard XL wall-mounted multi-channel controller
SP-1104Plus toxic gas detector
美国华瑞(RAE)
SP-1104Plus toxic gas detector
MSA 9020-4 LCD controller
美国梅思安(MSA)
MSA 9020-4 LCD controller
MSA 9010/9020 controller
美国梅思安(MSA)
MSA 9010/9020 controller
MSA Ultima X3 fixed probe gas detector
美国梅思安(MSA)
MSA Ultima X3 fixed probe gas detector
MSA Ultima XIR infrared gas detectors
美国梅思安(MSA)
MSA Ultima XIR infrared gas detectors

online service

点击这里给我发消息 点击这里给我发消息